Browse repository
Stratigraphic unit type
1-10 of 18 results
 1  / 2 
    Previous / Next    
ID  2210  -  Public access
Description :   UE235. Cut of circular shape in plan, approximately 22 cm in diameter with a maximum depth of 7 cm. The break at the mouth of the hole is abrupt, while at the base it is more gradual. This is concave and circular, about 14 cm in diameter. It has no orientation or inclination. It was excavated in UE249 and contains UE218.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2213  -  Public access
Description :   UE219. Cut with an almost circular shape in plan, 18 cm in diameter (partially destroyed by the excavation of tomb T1), and 13 cm in depth. The walls fall inwards at an angle of about 100. The base is circular in plan, 8 cm in diameter, concave, and without orientation. The mouth-wall and wall-base ruptures form an angle greater than 90º, giving the hole the appearance of a cone. It was excavated in UE249 and contains UE202.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2215  -  Public access
Description :   UE220. Cut of semicircular shape in plan that seems to continue towards the SE profile of tomb T2. The visible surface protrudes 15 cm from the profile and is 16 cm deep. The walls fall inwards at an angle of about 100º to the base, which is semicircular and flat. The wall-base rupture is abrupt, almost forming a right angle. No orientation can be seen as it is partially excavated. It was excavated in unit UE249. Contains UE203.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2217  -  Public access
Description :   UE221. Cut of semicircular shape in plan that seems to continue towards the SE of tomb T2. The visible surface protrudes 22 cm from the profile and is 18 cm deep. The walls fall inwards at an angle of about 100º until they reach the base, which is oval and concave, 8 x 5 cm. The wall-base rupture is smooth. No orientation can be seen. It was excavated in unit UE249 and contains unit UE204.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2219  -  Public access
Description :   UE222. Cut of semicircular shape in plan that seems to continue towards the SW of tomb T2. The visible surface protrudes 18 x 8 cm (E-W x N-S) from the profile and is 7 cm deep. The walls fall inwards at an angle of about 100º to the base, which is semicircular and concave. The wall-base rupture is smooth, with the appearance of a cone. No orientation is seen. It was excavated in unit UE249 and contains unit UE205.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2221  -  Public access
Description :   UE223. Cut of semicircular shape in plan that seems to continue towards the S-SW of tomb T2. The visible surface protrudes 18 x 8 cm (E-W x N-S) from the profile and is 7 cm deep. The walls fall inwards at an angle of about 100º to the base, which is semicircular and flat. The wall-base rupture is abrupt, forming almost a right angle. No orientation can be seen. Excavated in UE249. Contains UE206.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2223  -  Public access
Description :   UE224. Cut with a circular shape in plan, approximately 15 cm in diameter with a maximum depth of 17 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom. The base, slightly oval (8 x 6 cm), is concave, with relatively soft ruptures with respect to the walls. It has no orientation or inclination. It was excavated in UE249 and contains unit UE207.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2225  -  Public access
Description :   UE225. Cut of circular shape in plan, approximately 15 cm in diameter with a maximum depth of 10 cm. The walls fall inwards at an angle of about 90º until they reach the bottom. The base is irregular and concave. Ceramic fragments were documented (visible at the boundary of the cut), which could belong to unit UE199 (in this case, UE199 -and its associated tomb- would be earlier). It has no orientation or inclination. It was excavated in the unit UE249 and contains unit UE208.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2227  -  Public access
Description :   UE226. Cut of almost circular shape in plan, about 15 x 12 cm (SW-NE x SE-NW) and a maximum depth of 11 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom. The base, slightly oval (8 x 6 cm), is concave with relatively soft ruptures with respect to the walls. It has no clear orientation or inclination. It was excavated in unit UE249 and contains unit UE209.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2229  -  Public access
Description :   UE227. Cut of circular shape in plan, approximately 17 cm in diameter and a maximum depth of 5 cm. The walls fall inwards at an angle greater than 120º until they reach the bottom. The base, oval (7 x 6 cm), is concave, with soft ruptures with respect to the walls. It has no orientation or inclination. It was excavated in unit UE249 and contains unit UE210.
Stratigraphic unit type:  Cut, post hole
[See more]
1-10 of 18 results  
 1  / 2 
    Previous / Next    
"Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0. International license."